GE Intelligent Platforms > Support >  Documentation > DO2210
IC695PMM335, PACMotion Multi-axis Motion Controller
Document(s)
Type File Name Date Posted Size Description
 gfk2449F.pdf 09/01/10 213K IC695PMM335-AE, Firmware version 1.50: Proficy Machine Edition 6.00 SIM 17 or higher required 
 gfk2449E.pdf 03/05/10 147K IC695PMM335-AD, Firmware version 1.11: Proficy Machine Edition 5.90 Service Pack 1 SIM 3 or higher required 
 gfk2449D.pdf 05/15/09 128K IC695PMM335-AC, Firmware version 1.10: Proficy Machine Edition 5.90 Service Pack 1 SIM 3 or higher required 
 gfk2449C.pdf 03/26/09 118K IC695PMM335-AB, Firmware version 1.01: Proficy Machine Edition 5.90 Service Pack 1 SIM 2 recommended 
 gfk2449B.pdf 12/12/08 116K IC695PMM335-AB, Firmware version 1.01, Resolves the following issues: MC_GearIn incorrect initial move when following actual position, Validation of Master Actual Velocity Filter (parameter 1321), MC_SetPosition immediately after drive enabled, Actual velocity for virtual axis reported incorrectly 
 gfk2449A.pdf 11/19/08 114K IC695PMM335-AA, Firmware version 1.00: Initial release 


Related Document(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
Publication Number: GFK-2449

Product history for the PMM335 motion controller

ProductVersionModule
PACSystems RX3i All All
PACMotion All All

Details
ID: DO2210
Category: Data Sheets
Category: IPIs
Last Updated: 09/01/10
Date Created: 11/19/08
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Overall Rating: 2 (1 response)
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment