GE Intelligent Platforms > Support >  Drivers - General > DG156
P31 Paradym-31
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : P31
Vendor : GE Intelligent Platforms
Hardware Manufacturer : Not Applicable

General

Platform Latest Version Type
Windows NT 6.00 COM
Windows/WFW 5.3 COM

Supported
Devices

Device Manufacturer Comment
none

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
Fix 5.5 or greater GE Fanuc Automation GE Fanuc Automation - -
Paradym-31 v2.8 or greater Wizdom Controls Wizdom Controls - -

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
none

Supported
Data Types

Data Type Comment
none

Supported
Memory Types

Device Memory Type Comment
none

Commands

Device Command Description Uses
none

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
none

Miscellaneous
Info

Relevant Notes
Read and Write of Paradym-31 variables.

History

Revision History
Reason for 6.00 Release on 6/12/98

Corrected problem of current value always being zero in the

MDI block.


Details
ID: DG156
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.