GE Intelligent Platforms > Support >  Drivers - General > DG137
MTL Mettler Weighing Terminals
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : MTL
Vendor : GE Intelligent Platforms
Hardware Manufacturer : Mettler/Toledo
Notes : Available for use with FIX32 and iFIX only.

General

Platform Latest Version Type
Windows 2000 6.0 COM
Windows 3.1 4.2 COM
Windows 95 6.0 COM
Windows NT 6.0 COM

Supported
Devices

Device Manufacturer Comment
ID1 MultiRange Mettler/Toledo -
ID5-082 MultiRange Mettler/Toledo -
ID5-089 MultiRange Mettler/Toledo -
PM6000 Mettler/Toledo -
SM3000 Mettler/Toledo -

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
none

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
Direct Link, Multi-Drop - 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 7, 8 1, 2 None, Odd, Even - NONE, CTS/RS, DTR/DSR -

Supported
Data Types

Data Type Comment
none

Supported
Memory Types

Device Memory Type Comment
none

Commands

Device Command Description Uses
All Devices D - Return the display to normal reading.
All Devices D_ - Write to the display.
All Devices DS - Generate an audio signal.
All Devices R1 - Switch keypad off.
All Devices RO - Switch keypad on.
All Devices SI - Transmit contents of main display irrespective of the scale stability.
All Devices T - Tare the scale.
All Devices U - Write the unit of measurement.
All Devices Z - Zero the scale.
ID1, ID5-082, ID5-089 AR020 - Read target value, upper tolerance, lower tolerance.
ID1, ID5-082, ID5-089 AW020 - Write target value, upper tolerance, lower tolerance.
PM6000 DY - Read target value, upper tolerance, lower tolerance.

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
none

Miscellaneous
Info

Relevant Notes
DBB I/O Address Parameters:



AWG - Lock/Unlock Accepted Weight

BTG - Delta-Track; Target Weight

BTL - Delta-Track; Lower Tolerance

BTU - Delta-Track; Upper Tolerance

CLR - Clear Display

KEY - Unlock/Lock

LCD - Write to Display

SIG - Beep Request

TAR - Tare Request

UNA - Unit of Measure

UNA:

DWT - 50 (Penny Weight)

G - 22 (Grams)

KG - 25 (Kilograms)

LB - 40 (Pounds)

OFF - 0 (Set unit to grams and turn the display off (PM/SM scales

only))

OZ - 36 (Ounces)

OZT - 48 (Troy Ounces)

UNT - Unit of Measure

WGA - Weight with Units

WGH - Weight

ZER - Zero Request

History

Revision History
Reason for 6.00a Release on 4/12/96:
* Corrected problem with units getting mixed up on writes by modifying
spare2 as always being local when needed.

Reason for 6.00b Release on 6/10/05:
* Driver has been rebranded to reflect GE Fanuc.


Details
ID: DG137
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Overall Rating: 2 (1 response)
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.