GE Intelligent Platforms > Support >  Drivers - General > DG70
GEF GE Fanuc v7.xx
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : GEF
Vendor : GE Intelligent Platforms
Hardware Manufacturer : General Electric
Notes : Currently available for use with FIX32 and iFIX only.

General

Platform Latest Version Type
Windows NT 7.11 COM

Supported
Devices

Device Manufacturer Comment
GE Fanuc 160I General Electric -
GE Fanuc 180I General Electric -

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
GE Fanuc Open CNC Drivers 1.6 General Electric General Electric - -

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
Direct Link - - - - - - - -

Supported
Data Types

Data Type Comment
ASCII Text stored as a 16-bit interger. Provided for backward compatibility.
Digital Short integer.
Float 32-bit floating point value.
Long Unsigned 32-bit integer.
Signed integer Signed 16-bit integer.
Signed Long Signed 32-bit integer.
Time Unsigned 32-bit integer.
Unsigned Integer Unsigned 16-bit integer.

Supported
Memory Types

Device Memory Type Comment
none

Commands

Device Command Description Uses
none

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
12AL 12 Bit Binary Scaled to EGUs - Alarming on out of range Ignores most significant 4 bits. - -
12BN 12 Bit Binary Scaled to EGUs- No Alarming on out of range Ignores most significant 4 bits. - -
13AL 13-bit binary number scaled to EGUs - Alarming on out of range Ignores most significant 3 bits. - -
13BN 13-bit binary number scaled to EGUs - No alarming on out of range Ignores most significant 3 bits. - -
15AL 15 Bit Binary Scaled to EGUs - Alarming on out of range Ignores most significant bit. - -
15BN 15 Bit Binary Scaled to EGUs - No Alarming on out of range Ignores most significant bit. - -
3BCD 3 Digit Binary Coded Decimal Range Alarm support. - -
4BCD 4 Digit Binary Coded Decimal Range Alarm support. - -
8AL 8 Bit Binary Scaled to EGUs - Alarming on out of range Ignores most significant byte. - -
8BN 8 Bit Binary Scaled to EGUs - No alarming on out of range Ignores most significant byte. - -
LIN Value scaled to EGUs Scales to 0-65535 or -32768-+32767;the driver automatically determines which range to use. - -
NONE Returns raw value - - -

Miscellaneous
Info

Relevant Notes
4/4/01: NOT W2K COMPATIBLE DUE TO 3RD PARTY CONSTRAINTS.

History

Revision History
Reason for 7.11a Release on 12/26/02:
* Added support for new Aladdin hardware key.

Reason for 7.11b Release on 03/26/2003:
* Modified documentation to comply with GE standards.

Reason for 7.11c Release on 08/16/2005:
* Updated to reflect GE Fanuc branding.


Details
ID: DG70
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Overall Rating: 5 (1 response)
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.