GE Intelligent Platforms > Support >  Drivers - General > DG279
YKG Johnson-Yokogawa DARWIN v6.xx
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : YKG
Vendor : GE Intelligent Platforms
Hardware Manufacturer : Johnson-Yokogawa
Notes : Available for use with FIX32 and iFIX only.

General

Platform Latest Version Type
Windows 2000 6.01 COM
Windows 95 6.01 COM
Windows NT 6.01 COM

Supported
Devices

Device Manufacturer Comment
DA100 Data Aquisition Unit Johnson-Yokogawa -
DS400 Sub Unit Johnson-Yokogawa -
DS600 Sub Unit Johnson-Yokogawa -

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
none

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
Direct Link, Multi-Drop ASCII Commands Selectable from 110 to 38400 7, 8 1, 2 None, Odd, Even - None, RTS/CTS, DTR/DSR -

Supported
Data Types

Data Type Comment
SIGNED -

Supported
Memory Types

Device Memory Type Comment
none

Commands

Device Command Description Uses
All FM Read PLCs data. -

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
LIN Value scaled to EGUs No alarming on out of range. Signed data type. - -
NONE Returns raw value No alarming on out of range. - -

Miscellaneous
Info

Relevant Notes
Cable Requirement:

Connects directly with DA100 RS232C port.

RS-232 cable for point to point communication.

For multidrop (expanded) connection, use dedicated twisted

pair cable between each sub-unit.

History

Revision History
Reason for 10/13/98 Release:
* Corrected problem with related tags displaying invalid number after
starting driver.

Reason for 6.01 Release on 2/1/99:
* Upgraded documentation.

Reason for 6.01b Release on 03/27/2003:
* Modified documentation to comply with GE standards.

Reason for 6.01c Release on 08/17/2005:
* Updated to reflect GE Fanuc branding.


Details
ID: DG279
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.