GE Intelligent Platforms > Support >  Drivers - General > DG229
UDC Honeywell UDC Controllers
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : UDC
Vendor : GE Intelligent Platforms
Hardware Manufacturer : Honeywell Inc.
Notes : Available for use with FIX32 and iFIX only.

General

Platform Latest Version Type
Windows 2000 6.03 COM
Windows 3.1 4.25 COM
Windows 95 6.03 COM
Windows NT 6.03 COM

Supported
Devices

Device Manufacturer Comment
UDC 3000 Honeywell Inc. -
UDC 5000 Honeywell Inc. -
UDC 6000 Honeywell Inc. -

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
none

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
Direct Link UDC RS485 Communication protocol 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 7, 8 1, 2 None, Odd, Even - None, RTS/CTS, DTR/DSR, RTS -

Supported
Data Types

Data Type Comment
Digital Individual bits
Float Float (18)
Signed Decimal (11)

Supported
Memory Types

Device Memory Type Comment
none

Commands

Device Command Description Uses
All 1 - 24 - -
All 103 - 114 - -
All 117 - 123 - -
All 125 - -
All 128, 129, 130, 131, 132, 133 - -
All 134 - 138 - -
All 139 - -
All 140 - 164 - -
All 165 - -
All 167 - 177 - -
All 178 - -
All 179 - 185 - -
All 187, 188, 190 - -
All 192 - 207 - -
All 250 - 255 - -
All 26 - -
All 29 - -
All 30 - -
All 35 - 46 - -
All 49, 50 - -
All 53 - 106 - -
All 81 - 97 - -
All Read and Write of all addressable controller parameters (according to function of ID code and status of device). - -
All The driver also supports extended addressing. - -

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
NONE Returns raw value N/A all values returned from Honeywell devices are pre-scaled. - -

Miscellaneous
Info

Relevant Notes
Cabling Requirements:



RS422 / 485 cabling per Honeywell specifications.

History

Revision History
Reason for 6.03 Release on 1/9/97:
* Driver released including all previous SIMs.

Reason for 6.03a Release on 6/23/00:
* Corrected a problem with the default driver configuration file, DEFAULT.UDC.

Reason for 6.03b Release on 07/28/2003:
* Enhanced driver to use 'E' codes when writing to the LSP1 (039) ... please see Honeywell documentation for details of 'E' code.

Reason for 6.03c Release on 08/17/2005:
* Updated to reflect GE Fanuc branding.


Details
ID: DG229
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.