GE Intelligent Platforms > Support >  Drivers - General > DG218
TTS Toshiba Prosec T-Series I/O Driver v6.xx
File(s)
Type File Name Date Posted Size Description

There are files attached to this record that may require you to login.

 


Description
ProductVersionModule
HMI/SCADA - iFIX All All
Code : TTS
Vendor : GE Intelligent Platforms
Hardware Manufacturer : Toshiba International Corporation
Notes : Available for use with FIX32 and iFIX only.

General

Platform Latest Version Type
Windows 2000 6.01 COM
Windows 95 6.01 COM
Windows NT 6.01 COM

Supported
Devices

Device Manufacturer Comment
EX-100 Series Toshiba International Corporation -
Prosec T-Series Toshiba International Corporation -

Additional
Requirements

Software Manufacturer Vendor Part No. Comment
none

Protocol

Type Supported Baud Rates Data Bits Stop Bits Parity Error Checking Hand Shaking Comment
Communication Network Computer Link Functions
(Serial, RS-485, Multi-drop protocol)		 110 to 38400 7, 8 1, 2 None, Odd, Even - None, RTS/CTS,
DTR/DSR		 Up to 100 EX-100 controllers or up to 32 T-Series PLCs can be linked.

Supported
Data Types

Data Type Comment
ASCII 8 bit character data
DIGITAL 1 bit data
FLOAT 32 bit IEEE floating point
LONG/SLONG 32 bit unsigned and signed data
SIGNED INT 16 bit signed integer
STRUCTURE ASCII data
UNSIGNED INT 16 bit unsigned integer

Supported
Memory Types

Device Memory Type Comment
All C Counter register
All D Data register
All ER PLC error status
All RT/WT Clock-Calendar
All RW Aux. Relay register
All S2 System info 2
All SR System info 1
All ST PLC status
All SW Special Register
All T Timer register
All XW External input register
All YW External output register
All (Except T1 Series) F F register
All (Except T1 Series) LW LW register
All (Except T1 Series) W W register

Commands

Device Command Description Uses
All DR Read data from registers -
All DW Write data to registers -
ALL ER PLC Error Status -
All RT Read PLC's built in Clock-Calendar data -
All S2 Read the PLC's system information 2 -
All SR Read the PLC's system information 1 -
All ST Read PLC operation status -
All WT Write to PLC's built in Clock-Calendar data -

Signal
Conditionings

Signal Type Description Comment Typical Gain Convergance Range
12AL 12 Bit Binary Scaled to EGUs - Alarming on out of range Ignores most significant 4 bits (nibble). - -
12BN 12 Bit Binary Scaled to EGUs- No Alarming on out of range Ignores most significant 4 bits (nibble). - -
15AL 15 Bit Binary Scaled to EGUs - Alarming on out of range Ignores most significant bit. - -
15BN 15 Bit Binary Scaled to EGUs - No Alarming on out of range Ignores most significant bit. - -
3BCD 3 Digit Binary Coded Decimal Scaled to EGUs. Alarming on out of range.
Ignores most significant 4 bits (nibble).		 - -
4BCD 4 Digit Binary Coded Decimal Scaled to EGUs. Alarming on out of range. - -
LIN Value scaled to EGUs No alarming on out of range. Signed and Unsigned data types. - -
NONE Returns raw value No alarming on out of range. - -

Miscellaneous
Info

Relevant Notes
none

History

Revision History
Reason for 6.01 Release on 9/21/98:
* Corrected communication to EX100 device and bit write problem.

Reason for 6.01a Release on 7/12/00:
* Corrected a problem with digital writes not working when connected to T-Series devices. EX100 devices appear to
function correctly.

Reason for 6.01b Release on 03/27/2003:
* Modified documentation to comply with GE standards.

Reason for 6.01c Release on 08/17/2005:
* Updated to reflect GE Fanuc branding.


Details
ID: DG218
Category: I/O Drivers
Last Updated: 03/29/10
Date Created: 04/24/00
Status: Published
Attachments: Yes
Language: English


 


Feedback

The feedback portlet allows users to rate content and share these cumulative ratings with other users.
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment


Note:  If your firewall blocks ZIPS and EXEs, simply right-click and select SAVE TARGET AS and change the extension to something like "XIP".  Once downloaded change the extension back to its original one.

All drivers produced by vendors other than GE ("3rd Party Drivers") are provided by GE "as is" and without warranty of any kind unless the vendor extends a pass-through warranty to the end user.  Support for 3rd Party Drivers is provided by the driver's vendor.