LogicMaster TM 90-30 Version 9.01, 9.02, or 9.05, IC641SWP316E,F,G and IC641SUG316E,F,G Issues.
When executing a "Store From Programmer to PLC" command to replace existing force values in the PLC Reference Tables with new force values, LogicMaster 90-30 Versions 9.01, 9.02, and 9.05, see part numbers listed above, will not properly overwrite the existing force values.
When executing a ?Load From PLC to Programmer? command to upload Reference Table data from a PLC to LogicMaster 90-30 while the PLC data has a ?forced? status, LogicMaster 90-30 Versions 9.01, 9.02, and 9.05, see part numbers listed above, will not save the ?forced? status.
Either of these issues can cause unexpected equipment operation, which could result in personal injury or property damage.
All users of the LogicMaster 90-30 software versions 9.01, 9.02, and 9.05, see part numbers listed above, must update the software using the service pack referred to as ?Special 2? for LogicMaster 90-30 Version 9.05, which is available from the GE Support site. To update the software:
Download the file lm9030v905sp2.zip
Shutdown LogicMaster 90-30 if it is running.
Extract the files from the lm9030v905sp2.zip to a temporary directory on the hard drive. This lm9030v905sp2.zip will include both "LM9030 9.05 Special 1.zip" and "LM9030 9.05 Special 2.zip".
Extract the files from the "LM9030 9.05 Special 1.zip" to the root directory of the drive on which Windows was installed (the default drive is "C:\"). Extract the files from the "LM9030 9.05 Special 2.zip" to the LM90 folder (the default location is "C:\LM90").