GE Intelligent Platforms > Support >  KB > KB8442
What Communications (TCP/UDP) Ports Does CIMPLICITY Use?
Description

Description

What communications (TCP/UDP) ports does CIMPLICITY use?

Resolution

The following list is contains all CIMPLICITY subsystems and their ports that are used for communications.

Subsystem

TCP Port Usage

Comments

Router

TCP 32000, 32256, 32512, 32768, UDP 32000

Not configurable

RtrPing

TCP 4000

Configurable using REDUND_PROBE_PORT global parm

WebView

TCP 80

TCP 10212

Configurable from CIMPLICITY Options &

Configurable in the Windows registry

Cabling Redundancy

TCP 5000 to 6000

Configurable in CIMHOSTS.TXT

Allen-Bradley Ethernet

RSLINX actually opens the ports.

Depends on selected protocol -- contact Rockwell for additional information

Allen-Bradley DH Plus

ISA Card Interface

 

Allen-Bradley DF1

Serial

 

Allen-Bradley Intelligent Antenna

<Serial

 

Advanced DDE Client

TCP 137, 9, 445, 135

 

CCM2

Serial

 

Florpro/Flonet

UDP 

165

Honeywell IPC 620

Serial or TCP/Telnet

User Configurable Port

Johnson Controls N2 Serial

Serial or TCP/Telnet

User Configurable Port

Marquee Driver

Serial or TCP/Telnet

User Configurable Port

Mitsubishi-A Serial

Serial

 

Mitsubishi TCP/IP

TCP

User configurable

Modbus Plus

ISA Card Interface

 

Modbus RTU

Serial or TCP/Telnet

User Configurable Port

Modbus TCP/IP

TCP

For polled communication, any port to destination:502

Omron Host Link

 

 

Omron TCP/IP

TCP

User configurable

OPC Client

TCP 137, 9, 445, 135

 

S90 Triplex

TCP 18245

For polled communication any port to destination 18245

 

S90 Ethernet / Host Communications Toolkit

TCP 18245

UDP 18245, 18246

 

Sharp TCP/IP

TCP

User configurable

Siemens TI Serial

Serial

 

Smart Eye

Serial or TCP/Telnet

User Configurable Port

SNP

Serial

 

SNPX

Serial or TCP/Telnet

User Configurable Port

SquareD

Serial or TCP/Telnet

User Configurable Port

Toyopuc

TCP

User configurable port

MMS

SISCO Stack (Port 102)

Contact SISCO for more details

FANUC CNCs (for HMI for CNC)

Varies - requires at least 2n+1 ports (two for each device, plus one for the alarm manager)

Contact CNC team for more information


ProductVersionModule
HMI/SCADA - CIMPLICITY All All


Details
ID: KB8442
Legacy ID: i024294
Category: Articles
Last Updated: 04/09/14
Date Created: 05/25/05
Status: Published
Attachments: No
Language: English
User Group: All


 


Overall Rating: 3 (2 responses)
Rate this content record (1=lowest, 5=highest)
5
4
3
2
1
Comment